Prices + Stock updated 9 Mar @ 13:04
3DXTech Thermax High-Temp Support Material - 1.75mm - Natural- 500g
HTS high-temp break-away support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials. ThermaX™ HTS High-Temp Support can be used as a break-away support with:
- PEKK + PEEK
- Ultem PEI
- PPSU
- PSU
- PPS
Features
Specs
Support
Recommended Print Conditions: (starting points)
- Extruder Temp: 350 - 380°C (all-metal extruder)
- Bed Temp: 120-160°C
- Bed Prep: PEI/Ultem® Tape, Polyimide Tape, Lightly sanded FR4 or Perf board
- Cooling: No cooling fan
- Print Speed: Print speeds of 30mm/s (starting point)
- Heated Enclosure: All high-temp materials print better within a heated enclosure or in a warm build environment. Enclosure temp should not exceed 185°C for our HTS to remain structurally sound as a support
- Support Removal: This is a break-away support and is NOT soluble. The support is best removed while the part is warm. If the part cools and support removal becomes difficult, then you can heat the part in a small oven (toaster oven or similar) for 30-45 minutes; then removal will be much easier. Chamber or oven should not exceed the Tg of the model material that you are printing with
- Drying Instructions: Please see the following instructions for when you want to dry out this filament, HERE
Next >
Filament Specifications
- Diameter: 1.75mm, 2.85mm (+/- 0.05mm)
- Color: Natural
- Spool Outer Diameter: 200mm
- Spool Width: 50mm
- Spool Hole Diameter: 52mm
Product Dimensions: 200 x 200 x 50mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Material Safety Data Sheet
Buy Now
3DXTech AquaTek X1 Support Material - 1.75mm - Natural - 500g
AquaTek™ X1 Universal Water Soluble Support Filament
AquaTek™ X1 is an all-new advanced universal water soluble support material formulated specifically for printing complex parts.
AquaTek™ X1 is readily water soluble in warm water with excellent adhesion to the broadest range of materials - including popular advanced composite materials CarbonX™ Carbon Fiber Nylon and AmideX™ Glass Fiber Nylon.
Buy Now
Kimya PPSU-S Filament - 1.75mm - Natural - 500g - RUNOUT SPECIAL
3D Filament PPSU-S is a polymer with very good chemical resistance, ideal for automotive, chemical processing, oil and electronics applications.
Buy Now
PolyMaker PolyDissolve S2, 1.75mm, 500g
PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
We recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 350g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to PLA and PET, can work with ABS and Nylon depending on your setup
Buy Now
3DXTech CarbonX PEEK + 10 Carbon Fibre - 1.75mm - Black - 500g
Carbon Fiber reinforced PEEK 3D Printing Filament is ideal for the most demanding applications
Buy Now
3DXTech ThermaX PEEK - 1.75mm - Natural - 500g
ThermaX™ PEEK (PolyEtherEtherKetone) is one of the highest-performance polymers in world. PEEK has exceptional mechanical, thermal, and chemical resistance properties making it a go-to material in some of the most demanding applications.
Buy Now
3DXTech ThermaX - PEKK - Natural - 500g
ThermaX™ PEKK-C (PolyEtherKetoneKetone) is made using Arkema Kepstan® PEKK [ 70/30 copolymer] and is one of the highest performance materials in the world while also being one of the easiest to print ultra-polymers.
Buy Now
3DXTech CarbonX PEEK + 20 Carbon Fibre - 1.75mm - Black - 500g
Carbon Fiber reinforced PEEK 3D Printing Filament is ideal for the most demanding applications
Buy Now
3DXTech Thermax Ultem 1010 PEI - Natural - 500g
3DXTECH produces this 3D printing filament using a specialty compound custom-formulated using ULTEM 1010 PEI resin and advanced carbon additives. PEI is an amorphous, high-performance polymer that combines excellent mechanical, thermal, and chemical resistance properties.
Buy Now
3DXTech Thermax Ultem 1010 PEI - Black - 500g
3DXTECH produces this 3D printing filament using a specialty compound custom-formulated using ULTEM 1010 PEI resin and advanced carbon additives. PEI is an amorphous, high-performance polymer that combines excellent mechanical, thermal, and chemical resistance properties.
Buy Now
3DXTech ThermaX Ultem 9085 PEI - Natural - 500g
Custom-formulated using ULTEM 9085 resin and advanced carbon nanotube additives. ULTEM PEI is an amorphous, high-performance polymer that combines excellent mechanical, thermal, and chemical resistance properties.
Buy Now
3DXTech ThermaX Ultem 9085 PEI - Red - 500g
Custom-formulated using ULTEM 9085 resin and advanced carbon nanotube additives. ULTEM PEI is an amorphous, high-performance polymer that combines excellent mechanical, thermal, and chemical resistance properties.
Buy Now
3DXTech ThermaX Ultem 9085 PEI + CF - Black - 500g
CarbonX™ CF PEI 9085 is made using Sabic Ultem™ 9085 resin and 15% high-modulus carbon fiber.
This custom formulation is an excellent printing aerospace-grade material specifically formulated for our aerospace clients.
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 2kg Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to PLA and PET
Buy Now
PolyMaker PolyDissolve S1, 1.75mm, 750g
PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 750g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility increases with water temperature. It offers great compatibility to a variety of materials.
Good adhesion to PLA and PET, can work with ABS and Nylon depending on your setup
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
