Prices + Stock updated 9 Mar @ 13:04
3DXTech AquaTek X1 Support Material - 1.75mm - Natural - 500g
AquaTek™ X1 Universal Water Soluble Support Filament
AquaTek™ X1 is an all-new advanced universal water soluble support material formulated specifically for printing complex parts.
AquaTek™ X1 is readily water soluble in warm water with excellent adhesion to the broadest range of materials - including popular advanced composite materials CarbonX™ Carbon Fiber Nylon and AmideX™ Glass Fiber Nylon.
Features
Specs
Support
AquaTek™ X1 Attributes
- Readily soluble in warm water
- Eco-friendly - safe for disposal in house or office drains
- Ideal support material for the widest array of materials
- Low moisture absorption while exposed during printing (less tacky over time)
Compatible Materials
AquaTek™ X1 is compatible as a water soluble support for the widest array of materials including PLA, ABS, ASA, PETG, PP, Nylon, and Flexibe grades (TPC, TPU, COPE). This includes composite variants of these grades such as carbon fiber, glass fiber, and ESD-safe.
Breaking away excess support material by hand before placing in a tub with some water agitation will greatly speed up dissolution time
Next >
Filament Specs
- 1.75mm +/- 0.05mm
- 2.85mm +/- 0.05mm
- Spool Outer Diameter: 200mm
- Spool Width: 50mm
- Spool Hole Diameter: 52mm
Recommended Print Conditions
- Extruder: 190-220°C
- Bed Temp: 60-90°C
- Chamber Temp: Up to 120°C if your printer is so equipped
- Storage: AquaTek™ X1 will absorb moisture from ambient humidity, therefore best practice is to store filament in a sealed container between uses
Recommended Support Removal Techniques
- Break away excess support material that is easily accessible - reduces dissolution time (more support material = longer time to dissolve)
- Submerge part in warm water. Hot tap water is typically 100-120°F; 38-49°C, which is generally more than adequate for dissolving AquaTek™ X1 (be safe with hot water!)
- Agitating water reduces dissolution time (sonic or mechanical agitation)
- Heat or replace warm water as it becomes cool if the support has not been removed
- Residue is ecologically safe and can be disposed of in house or office drain - rinse drain thoroughly with fresh warm water to assure waste water evacuates
Product Dimensions: 200 x 200 x 50mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
3DXTech Thermax High-Temp Support Material - 1.75mm - Natural- 500g
HTS high-temp break-away support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials. ThermaX™ HTS High-Temp Support can be used as a break-away support with:
- PEKK + PEEK
- Ultem PEI
- PPSU
- PSU
- PPS
Buy Now
PolyMaker PolyDissolve S2, 1.75mm, 500g
PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
We recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 350g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to PLA and PET, can work with ABS and Nylon depending on your setup
Buy Now
BASF UltraFuse PolyPropylene - 2.85mm - Natural - 700g Spool
Ultrafuse PP (previously Innofil3D PP, different name, same high-quality product) is a high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties of make it an ideal material for 3D-printing applications, that have to endure high stress or strain.
Buy Now
BASF UltraFuse PolyPropylene + Glass Fibre - 2.85mm - Black - 700g
Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of FFF 3D-printers with tough nozzles.
Buy Now
3DXtech CarbonX PP + Carbon Fibre - Black - 650g Spool
CarbonX™ PP+CF is made using a specialty formulated PP copolymer and reinforced with 15% premium high-modulus carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
Buy Now
3DXtech CarbonX PP + Carbon Fibre - 1.75mm - Black - 2kg Spool
CarbonX™ PP+CF is made using a specialty formulated PP copolymer and reinforced with 15% premium high-modulus carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 2kg Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to PLA and PET
Buy Now
PolyMaker PolyDissolve S1, 1.75mm, 750g
PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
Buy Now
BASF UltraFuse PolyPropylene - 1.75mm - Natural - 700g Spool
Ultrafuse PP (previously Innofil3D PP), different name, same high-quality product) is a high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties of make it an ideal material for 3D-printing applications, that have to endure high stress or strain.
Buy Now
3DXtech Firewire Flame Retardant PC+ABS - 1.75mm - Black - 750g
Firewire® Flame Retardant PC-ABS (polycarbonate + ABS alloy) is made using a premium UL94 V-0 rated PC-ABS. It has higher strength and thermal resistance (HDT) than ABS, alloying the mechanical properties and high-heat resistance of PC with the printability of ABS. This filament is ideal for applications which require UL94 V-0 self-extinguishing characteristics.
Buy Now
ForwardAM UltraFuse PolyPropylene + Glass Fibre - 1.75mm - Back - 700g
Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of FFF 3D-printers with tough nozzles.
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 750g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility increases with water temperature. It offers great compatibility to a variety of materials.
Good adhesion to PLA and PET, can work with ABS and Nylon depending on your setup
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
