Prices + Stock updated 26 Sep @ 10:05
Kimya PETG + Carbon Fibre - 1.75mm - Black - 500g Spool
PETG CARBON has an excellent tensile modulus. PETG is reinforced with carbon fibers, giving it high impact strength
Features
Specs
Support
- No Delamination
- High Rigidity (for PETG)
- Chopped strand Carbon Fibre Reinforcement
- Post-Printing Processes Possible
Next >
More Information
Print Settings
- Print Speed: 50 mm/s
- Extrusion Temperature: 225°C
- Platform Temperature: 60°C
See TDS on WebSupport Tab for more properties, Tensile, Bending, Charpy Impact and Hardness test results.
Product Dimensions: 200 x 200 x 55mm
Next >
This product is in the categories:
Related Products:
Buy Now
Kimya PETG-S Filament - 1.75mm - Black - 750g - UNTIL SOLD OUT
The PETG-S Kimya 3D Filament offers a great balance of flexibility and strength.
Buy Now
PETG Filament - 1.75 mm - Black - 1kg spool
This PETG (sometimes called T-Glass) is 1.75mm in diameter on a 1KG spool.
Recommended Temperature: 230-250 degrees
Buy Now
Kimya PETG + Carbon Fibre - 2.85mm - Black - 500g - UNTIL SOLD OUT
PETG CARBON has an excellent tensile modulus. PETG is reinforced with carbon fibers, giving it high impact strength
Buy Now
Kimya ABS + Kevlar Fibre - 1.75mm - Black - 500g Spool
ABS KEVLAR has been deisgned for 3D printing by a precise formulation of aramid fibers into ABS materials.
Buy Now
Raise3D Premium PETG - 1.75mm - Blue - 1kg Spool
Genuine Raise 3D Premium PETG - Blue on a 1kg Spool
Buy Now
Kimya PETG-S Filament - 1.75mm - White - 750g Spool - UNTIL SOLD OUT
The PETG-S Kimya 3D Filament offers a great balance of flexibility and strength.
Buy Now
Raise3D Premium PETG - 1.75mm - Red - 1kg
Genuine Raise 3D Premium PETG - Red on a 1kg Spool
Buy Now
Kimya PETG-S Filament - 1.75mm - Clear Blue - 750g - UNTIL SOLD OUT
The PETG-S Kimya 3D Filament offers a great balance of flexibility and strength.
Buy Now
Kimya ABS + Carbon Fibre - 1.75mm - Black - 500g Spool
ABS CARBON FILAMENT improves interlayer adhesion and increases compression strength.
Buy Now
Spectrum PLA-CF - Carbon Fibre - 1.75mm - 1kg Spool
Spectrum Carbon PLA is a modified, PLA-based filament blended with carbon fibers which contributes to a considerably higher rigidity, hardness, and tensile resistance while retaining low shrinkage and very good adhesion to build platforms typical for the pure PLA. The 10% addition of carbon fibre enables you to obtain matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.
Buy Now
Raise3D Premium PETG - 1.75mm - Black - 1kg Spool
Genuine Raise 3D Premium PETG - Black on a 1kg Spool
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15