Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of FFF 3D-printers with tough nozzles.
FeaturesSpecsSupport
The extreme stiffness makes this material highly suitable for demanding industrial applications.
Key properties of Ultrafuse PP GF30 are:
Extremely high stiffness
High heat resistance
UV-resistant
Chemical resistant
PP GF30 is a functional 3D printing filament, that can be used in high-performance applications. The excellent mechanical properties, high temperature- and chemical resistance make this filament highly suitable in an industrial environment.
Ultrafuse PPGF30 is an abrasive material, hardened nozzle (steel or ruby) is advised of >= 0.6 mm to prevent clogging of the nozzle.
We are looking forward to feedback on this product. PP is widely used due to its flexibility. This being Glass Fibre infused is less flexible, although we found X Y flexibility still present; however we note that we found it snaps under Z flexing pressure. It should however be very impact resistant.
Next >
Ultrafuse® PP GF30
Print Temp: 230 ± 10°C
Print Speed: 40 – 80 mm/s
Bed Temperature: 30°C with Packing tape
Top/Bottom Thickness: 0.6mm (3 layers)
Nozzle: 0.6 mm
Shell Thickness: 1.2mm (2 shells)
Layer Height: 0.2mm
Fan speed: Up to 100%
Note: Infill >80% will cause high warpage
Note: Recommended support: AquaTek X1 water soluble support
We printed this material easily at these setting :
Print/Extrusion temp : 240c
Bed surface temp: 40c
What we put on the bed : Packing tape, yes you read that correct, plain old clear packing tape. Prints stuck perfectly and if you wait till print cools it pops itself off the bed. When we removed print hot tape came with it.
Print settings : We used our Flashforge Guider with a 0.6 Nozzle. Our 1st layer was 0.6mm, then 0.4 Layer height after that. We used 2 shells 25% infill, with NO filament cooling fan on!
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
CarbonX™ PP+CF is made using a specialty formulated PP copolymer and reinforced with 15% premium high-modulus carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
Ultrafuse PP (previously Innofil3D PP), different name, same high-quality product) is a high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties of make it an ideal material for 3D-printing applications, that have to endure high stress or strain.
CarbonX™ PP+CF is made using a specialty formulated PP copolymer and reinforced with 15% premium high-modulus carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
Buy Now
3DXTech AquaTek X1 Support Material - 1.75mm - Natural - 500g
AquaTek™ X1 Universal Water Soluble Support Filament
AquaTek™ X1 is an all-new advanced universal water soluble support material formulated specifically for printing complex parts.
AquaTek™ X1 is readily water soluble in warm water with excellent adhesion to the broadest range of materials - including popular advanced composite materials CarbonX™ Carbon Fiber Nylon and AmideX™ Glass Fiber Nylon.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
