Prices + Stock updated 26 Sep @ 10:05
0.6mm Nozzle - M6 Thread for MK8 Extruders - Wear Resistant TwinClad Coating
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread, but has a larger and 0.6mm hole, which it sometimes used for faster printing and with metal and PETG filaments. Total Length 13mm
Features
Specs
Support
This nozzle has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
TwinClad XT is a nickel composite coating for very low frction. Over a 360 brass base, it gives a lower coefficient of friction than PTFE (Teflon) over nickel
This is dimensioned the same as our standard nozzle, as used on the Makerbot MK8 extruders.
ALWAYS run preheat before changing nozzles to avoid stripped threads.
Is is compatabnle with Makerbot:
- Replicator 1 (Single and Dual)
- Replicator 2
- Replicator 2x
- Craftbot 2
- CraftBot PLUS
- BQ Witbox
- BQ Prusa i3 Hephestos
- Creality CR-10
(Note Changing nozzle on a Smart Extruder is difficult and may void Smart Extruder warranty)
- Replicator 5th Gen
- Replicator Mini
- Replicator Z18
Next >
Specifications:
Hole:0.6mm hole.
Thread: M6, 5mm long.
Total Length: 13mm.
Head width: 9mm (for better heat retention)
Base: Flat at screw/thread end (click photo under more info page for details).
Tip may have a slight flatened area.
Filament Size: suitable for 1.75mm filament.
CoatingTwinClad Coated
Is is compatible with the following machines where the MicroSwiss upgrade is fitted and no PTFE lines barrel:
- FlashForge Creator Pro
- FlashForge Creator X
- FlashForge Dreamer
- Flashforge Finder
- Flashforge Guider
- Dremel Idea Builder
- PowerSpec 3D Pro
- PowerSpec 3D X
- Wanhao Duplicator 4S
- Wanhao Duplicator 4X
- Wanhao i3
- Monoprice Maker Select 3D Printer v2
- Cocoon Create 3D Printer
Product Dimensions: 13 x 7 x 7mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
This product is in the categories:
Related Products:
Buy Now
0.4mm Nozzle - M6 Thread for MK8 Extruders - Twin Clad Coated
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
Buy Now
0.2mm Nozzle - M6 Thread for MK8 Extruder - Twin Clad - 1.75mm filament
This wear resistant nozzle by AVN/Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
Buy Now
Stainless Steel Barrel with TwinCladXT Coating
This tube is an improvement over the stock MakerBot Replicator 1 and MakerBot Replicator 2 thermal barrier tube. Also used on many other types of 3D Printers
Buy Now
0.4mm Nozzle - M7 Thread for MK10 Extruders - Wear Resistant Twin Clad Coating-FFptfe
This This wear resistant nozzle by Micro Swiss suits a range of printers has an M7 thread and 0.4mm hole.
Buy Now
0.2mm Nozzle - M7 Thread for MK10 Extruder - Twin Clad Coated-FFptfe
This This wear resistant nozzle by AVN/Micro Swiss suits a range of printers with 1.75mm filament. It has an M7 thread and 0.2mm hole.
Buy Now
Flashforge Barrel for Dreamer / Creator Pro / Inventor 1 - FFptfe
Genuine FlashForge barrel. It has a smooth outer tube with flats for holding with a spanner or pliers and a threaded end
Buy Now
Micro Swiss Extruder + HotEnd for Creality Ender 5 Printers
Micro Swiss Direct Drive Extruder is a drop in system for Ender 5 Printers. We include the MicroSwiss HotEnd.
- No modification required, simple plug and play
- No printed brackets or sandwiches
Buy Now
Barrel for Flashforge Guider / Finder - FFptfe
Threaded metal tube that runs between the heater block and the circular heatsink in the extruder
Buy Now
Capricorn Teflon tube for Flashforge Single Extruder Barrel - FFptfe
This short piece of Teflon tubing is for lining the barrel on the Flashforge Guider, Guider2, Finder, Finder Plus and Inventor 2
Made from Capricorn Tubing, it is higher lubricity and more resistant to the high temperatures experiences in a hot end
Buy Now
Micro Swiss Extruder + HotEnd for Creality CR-10 / Ender 3 Printers
Micro Swiss Direct Drive Extruder is a drop in system for CR10 / Ender Printers. We include the MicroSwiss HotEnd.
- No modification required, simple plug and play
- No printed brackets or sandwiches
Buy Now
Teflon tube for Flashforge Single Extruder Barrel - FFptfe
This short piece of Teflon tubing is for lining the barrel on the Flashforge Guider, Guider2, Finder, Finder Plus and Inventor 2
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15