ThermaX™ PEEK (PolyEtherEtherKetone) is one of the highest-performance polymers in world. PEEK has exceptional mechanical, thermal, and chemical resistance properties making it a go-to material in some of the most demanding applications.
FeaturesSpecsSupport
Please Note: This is an expert level filament. It requires much experience, and a hig build chamber temperature to acheive good results.
ThermaX™ PEEK (PolyEtherEtherKetone) is one of the highest-performance polymers in world. PEEK has exceptional mechanical, thermal, and chemical resistance properties making it a go-to material in some of the most demanding applications.
Print ThermaX™ PEEK parts with Gearbox™ HT2 High-Temp 3D Printer. Check it out HERE.
Product Attributes Include
Glass Transition Temp (Tg) of 143°C
Melt Temp (Tm) of 343°C
Inherent flame resistance (UL94 V-0)
Outstanding mechanical, thermal, and chemical resistance
Continuous Use Temperature (CUT) of 260°C, higher for short duration
Excellent resistance to a broad range of chemicals, such as those used in the oil/gas, automotive, aerospace, industrial, and chemical processing industries
Filament Specifications
Diameter: 1.75mm (+/- 0.05mm)
Colors: Natural/Tan
Larger reel quantities available upon request
Recommended Print Conditions
Extruder Temp: 375 – 410°C
Bed Temp: 130 – 145°C
Bed Prep: Ultem™ Tape is the ideal build surface, glue stick on clean glass is suitable
Enclosure temp (if your printer is equipped): 70 – 140°C [hotter is better, up to 140°C]
Print Speed: 10-50 mm/s for 0.2mm layer height, fast as results dictate
Drying Instructions: Please see the following instructions for when you want to dry out this filament, HERE
Bed Prep: Ultem™ Tape is the ideal build surface, glue stick on clean glass is suitable
Enclosure temp (if your printer is equipped): 70 – 140°C [hotter is better, up to 140°C]
Print Speed: 10-50 mm/s for 0.2mm layer height, fast as results dictate
Drying Instructions: Please see the following instructions for when you want to dry out this filament, HERE
Product Dimensions: 200 x 200 x 50mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
3DXTech Thermax High-Temp Support Material - 1.75mm - Natural- 500g
HTS high-temp break-away support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials. ThermaX™ HTS High-Temp Support can be used as a break-away support with:
- PEKK + PEEK
- Ultem PEI
- PPSU
- PSU
- PPS
Buy Now
Kimya PEKK-A High Temp - 1.75mm - Natural - 250g Spool - UNTIL SOLD OUT
Kimya PEKK-A filament made from Arkema’s KEPSTAN® is intended for technical applications requiring high resistance to temperature (up to 260°C)
Buy Now
3DXTech ThermaX - 1.75mm - Natural - 500g
ThermaX™ PEKK-C (PolyEtherKetoneKetone) is made using Arkema Kepstan® PEKK [ 70/30 copolymer] and is one of the highest performance materials in the world while also being one of the easiest to print ultra-polymers.
Carbon Fiber reinforced PEEK 3D Printing Filament is ideal for the most demanding applications
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
