CarbonX™ PP+CF is made using a specialty formulated PP copolymer and reinforced with 15% premium high-modulus carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
FeaturesSpecsSupport
CarbonX™ Carbon Fiber Reinforced Polypropylene (PP+CF) 3D Filament
CarbonX™ PP+CF is made using a specialty formulated polypropylene copolymer reinforced with high-modulus chopped carbon fiber. This filament is based on a patent-pending formulation that offers improved thermal properties and low shrinkage/warp compared to competitive PP-based compounds.
The reels contain 750g of filament, but based on the very low density of PP+CF, this is the same amount of filament that would typically be found on a 1kg reel of ABS. This allows you to print light-weight and exceptionally rigid parts for medical, drones, watercraft, automotive, or any application which would benefit from a light weight, stiff, chemically resistant material.
Benefits of PP+CF Include:
• Excellent resistance against a huge variety of chemicals
• Low density and weight
• Easier to print than most flexible materials and suitable for use with practically any 3D printer
• Does not absorb moisture, no drying needed!
• High strength and stiffness
Chemical Resistance of PP+CF
Since properties can change depending on print environment and 3D model geometry and/or surface area, it is always required to do your own testing, but Polypropylene is famous for its chemical resistances to a huge range of environments including:
• Acids: Acetic, Boric, Hydrochloric, Phosphoric, Stearic, Sulfuric, Uric
• Bases: Hydrocides of Ammonium, Barium, Calcium, Magnesium, Potassium, Sodium
• Solvents: Acetone, Ethanol, MEK, Phenol (10%), Water
Next >
Recommended Print Settings
• Extruder Temp: 220-250°C
• Bed Temp: 23-60°C
• Heated Chamber: Not required
• Nozzle Specs: 0.4mm diameter minimum, toughened / Hardened Steel Nozzle
• Bed Adhesion: Magigoo Bed Prep
• Layer Height: 0.25mm or higher
• Drying Specs: Not needed
• Supports: AquaTek X1 / Water Soluble Support
Product Dimensions: Ø300 x 100mm wide
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Technical Data Sheet
Ultrafuse PP (previously Innofil3D PP), different name, same high-quality product) is a high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties of make it an ideal material for 3D-printing applications, that have to endure high stress or strain.
Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of FFF 3D-printers with tough nozzles.
Buy Now
3DXTech AquaTek X1 Support Material - 1.75mm - Natural - 500g
AquaTek™ X1 Universal Water Soluble Support Filament
AquaTek™ X1 is an all-new advanced universal water soluble support material formulated specifically for printing complex parts.
AquaTek™ X1 is readily water soluble in warm water with excellent adhesion to the broadest range of materials - including popular advanced composite materials CarbonX™ Carbon Fiber Nylon and AmideX™ Glass Fiber Nylon.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
