The extreme stiffness makes this material highly suitable for demanding industrial applications.

Key properties of Ultrafuse PP GF30 are:
• Extremely high stiffness
• High heat resistance
• UV-resistant
• Chemical resistant

PP GF30 is a functional 3D printing filament, that can be used in high-performance applications. The excellent mechanical properties, high temperature- and chemical resistance make this filament highly suitable in an industrial environment.

Ultrafuse PPGF30 is an abrasive material, hardened nozzle (steel or ruby) is advised of >= 0.6 mm to prevent clogging of the nozzle.

Next > More Information

Ultrafuse® PP GF30

• Print Temp: 230 ± 10°C
• Print Speed: 40 – 80 mm/s
• Bed Temperature: 30°C with blue tape
• Top/Bottom Thickness: 0.6mm (3 layers)
• Nozzle: 0.6 mm
• Shell Thickness: 1.2mm (2 shells)
• Layer Height: 0.2mm
• Fan speed: Up to 100%

Note: Infill >80% will cause high warpage
Note: Recommended Support: AquaTek X1 Water Soluble Support


Product Dimensions: 215x22x70


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet

Technical Data Sheet