Prices + Stock updated 9 Mar @ 13:04
BASF UltraFuse PolyPropylene + Glass Fibre - 2.85mm - Black - 700g
Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of FFF 3D-printers with tough nozzles.
Features
Specs
Support
The extreme stiffness makes this material highly suitable for demanding industrial applications.
Key properties of Ultrafuse PP GF30 are:
- Extremely high stiffness
- High heat resistance
- UV-resistant
- Chemical resistant
PP GF30 is a functional 3D printing filament, that can be used in high-performance applications. The excellent mechanical properties, high temperature- and chemical resistance make this filament highly suitable in an industrial environment.
Ultrafuse PPGF30 is an abrasive material, hardened nozzle (steel or ruby) is advised of >= 0.6 mm to prevent clogging of the nozzle.
Next >
More Information
Ultrafuse® PP GF30
- Print Temp: 230 ± 10°C
- Print Speed: 40 – 80 mm/s
- Bed Temperature: 30°C with blue tape
- Top/Bottom Thickness: 0.6mm (3 layers)
- Nozzle: 0.6 mm
- Shell Thickness: 1.2mm (2 shells)
- Layer Height: 0.2mm
- Fan speed: Up to 100%
Note: Infill >80% will cause high warpage
Note: Recommended Support: AquaTek X1 Water Soluble Support
Product Dimensions: 215x22x70
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
Material Safety Data Sheet
Technical Data Sheet
Buy Now
BASF UltraFuse PolyPropylene - 2.85mm - Natural - 700g Spool
Ultrafuse PP (previously Innofil3D PP, different name, same high-quality product) is a high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties of make it an ideal material for 3D-printing applications, that have to endure high stress or strain.
Buy Now
3DXTech AquaTek X1 Support Material - 1.75mm - Natural - 500g
AquaTek™ X1 Universal Water Soluble Support Filament
AquaTek™ X1 is an all-new advanced universal water soluble support material formulated specifically for printing complex parts.
AquaTek™ X1 is readily water soluble in warm water with excellent adhesion to the broadest range of materials - including popular advanced composite materials CarbonX™ Carbon Fiber Nylon and AmideX™ Glass Fiber Nylon.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
