Raise3D RMS220 SLS Printer

The high-power fibre laser brings you a significantly faster build rate than any other machine in this price range. It combines this with fine detail, low minimum wall thickness and easy to use software.

The modular build chamber, paired with a quick 45-minute powder-change system, minimizes downtime between jobs.

Preliminary Details:
• 75-watt high-power fiber laser (1064mn wavelength)
• Build Volume: 220 x 220 x 350mm = 17 Litres
• Minimum wall thickness of 0.5 mm (with PA11)
• Four-zone self-calibrating infrared heating system
• Powder re-use: 70-80% under Nitrogen, 50-70% in air
• Laser Spot size: 0.2 mm
• Print Speed: 2.2 Litres per hour
• Z Print Speed: 40mm per hour
• Scanning Speed: 30,000 mm/s
• Max. Chamber Temp: 220°C
• Mounting: ESD Levelling castors
• Machine Size: 861 x 685 x 1558mm
• Machine Weight: 300kg
• Power Input: 240V AC Single phase, 15A Circuit. 2800W peak, 1000W average

• Materials at Launch: PA12 black
• Materials: PA11, PA12, PA12+GB, TPU-86A, TPU-90A, PA Next, PA Next+GB

Notes:

• The RMS220 comes with a 31.5Lt hopper. To use the full build height, the 40Lt material box (supplied with the C220) is required
• For printing PA11, an external nitrogen suply is still recommended
• Raise3D Materials are fully supported. Select 3rd party materials are supported with a material card (purchased separately). An open material card is also available to allow all parameters to be set, for a once off fee.

Next > More Information

Ancillaries:

These items are not included, but you should consider them in your budget

Anti-static, anti-spark vacuum cleaner, for general cleanup. Eg: Delfin MTL301Z22. This also provides a vacuum for the cleaning station to seive more efficiently.

Nitrogen Generator now integrated! - Compressed air supply required.
Nitrogen Supply
Except for TPU, a Nitrogen Atmosphere is recommended for maximum part strenth and increased printing speed.
Bottles are suitable for occasional use.
Nitrogen Generators for production use (these can be as little as $7000)
- Flow rate requirement (min): at least 7.5L/m (normal mode) or ;15L/m(quick purgingmode) - Rated Pressure Range: 0.1-0.9 mpa
- Nitrogen Purity: >=99.5%


Product Dimensions: 861 x 685 x 1558mm


Next >

Bilby 3D provides a 12 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket

10% Bulk Discount available; Order 5 or more machines at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.