Prices + Stock updated 22 Apr @ 17:28
Stainless Steel Barrel (aka thermal barrier or Heat core)
Stainless Steel Barrel.(aka Throat, Heatbreak)
Connects the heater block to the extruder mounting block or heatsink
Features
Specs
Support
All metal, does not cntain a PTFE lining, so suitable for higher temperatures and abrasive materials
Next >
- Length: 26mm
- Thread: M6x1
- Internal 1.8mm
- Material: Stainless Steel
Product Dimensions: 26 x 6 x 6mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
Heater Block for MK8 Extruders
Aluminium Heater Block 20x20x10mm &plusmin;1mm.
Buy Now
Heater Block - v5 Aluminium Mini Size
This mini Heater block has a variety of pre-drilled and tapped holes for your layout. Anodised Aluminium with chamfered edges. Quality look!
Buy Now
0.6mm Nozzle - M6 Thread for MK8 Extruders - Wear Resistant TwinClad Coating
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread, but has a larger and 0.6mm hole, which it sometimes used for faster printing and with metal and PETG filaments. Total Length 13mm
Buy Now
0.4mm Nozzle - M6 Thread - Wear Resistant Twin Clad Coating - 3mm Filament
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers has a 5mm long M6 thread and 0.4mm tip hole - MK8 style. Total Length 13mm. The main hole is for filament with 2.85/3mm diameter or 3mm OD PTFE tube.
Buy Now
Barrel for Flashforge Guider / Finder - FFptfe
Threaded metal tube that runs between the heater block and the circular heatsink in the extruder
Buy Now
0.4mm Nozzle - M6 Thread for MK8 Extruders - Twin Clad Coated
This wear resistant nozzle by Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
Buy Now
0.2mm Nozzle - M6 Thread for MK8 Extruder - Twin Clad - 1.75mm filament
This wear resistant nozzle by AVN/Micro Swiss is the standard size for a range of printers
It has a Wear Resistant High Lubricity TwinClad XT Coating this makes it a excellent choice when printing with abrasive/wearing material such as Bronze, Copper, Alumininium or Carbon Fiber filament.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
