The Mingda MD-1000D, Faster High Temperature Dual Extruder 3D Printer
Strong choice for 2 Colours, 2 Materials and Large 3D Printing without breaking the bank.
Backed by Bilby3D service and support.
1000mm³ Build Size
Dual Extruders
Open Materials - including abrasives
High speed - up to 500 mm/s
Closed-loop motors and quality linear rails
Direct Drive Dual Extruders
Better material control and flow, improving surface quality and reliability even with more flexible materials such as softer TPU with an 85A shore hardness
Fast Material Switching
Twin extruders allow you to quickly switch between the 2 heads with reduced change-over time and waste.
Compared with a multi-material feeding unit, dual-material printing requires less time in filament changing and creates less waste.
It creates a clean interface between two materials, embracing hassle-free removal and avoiding stains and weird blending along the seam.
Breakaway and Dissolvable support materials in your print job will print cleaner and faster.
Faster Printing
With increased printing speeds, upto 5x faster than other 3D printers, the MD-1000D achieves ultra-high efficiency printing.
500mm/s Travel Speed
300mm/s Print Speed - Material Dependant
40mm³/s maximum material flow rate
Higher Temperature Materials
Extruders running at up to 350°C can process a wide range of materials from PLA to PP, PA and PC.
They heat up fast! Getting to 200°C in about 40 seconds
| Print Technology | Fused Deposition Modeling (FDM) |
| Print Volume | 1000 x 1000 x 1000 mm |
| Machine Dimensions | 1680 x 1365 x 1665 mm |
| Extruder Quantity | Twin |
| Nozzle Diameter | 0.4mm (0.6, 0.8, 1.0 mm optional) |
| Max Extruder Temperature | ≤350°C (Recommended temperature ≤320 ℃) |
| Platform Temperature | ≤110°C |
| Max Flow | 40mm³/s |
| Max Print Speed | 500mm/s (Recommend Printing Speed: 200-300mm/s ) |
| Display Screen | 10-inch HDMI touch screen |
| Slicing Software | MingDa OrcaSlicer, Prusa Slicer, etc |
| Connectivity | None, Ethernet, WiFi, Cloud Management |
| Camera | Yes, for Print Monitoring |
| Input Voltage | 100/240AC 50/60Hz |
| Rated Power | 2700W |
| Firmware | Klipper |
| Filament Compatibility | Common filament: PLA, TPU, PETG
Engineering filament: PA-CF/GF, PET-CF/GF, HtPA-CF/GF, ABS-GF25, ABS-CF20, PA-GF25/CF25
Support filament: S-Mulit, S-HtPA, etc |
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
