The Mingda MD-400D, Faster High Temperature IDEX 3D Printer
The Ideal Choice for 2 Colours, 2 Materials and Mass Production 3D Printing
Toughened ready for Carbon, Glass and Kevlar composite materials
Backed by Bilby3D local service and support
Fast Material Switching
IDEX allows you to quickly switch between the 2 heads with reduced change-over time and oozing.
Compared with a multi-material unit, IDEX dual-material printing requires less time in filament changing and creates less waste.
Plus, IDEX offers the cleanest two-extruder solution that prevents cross-contamination.
It creates a clean interface between two materials, embracing hassle-free removal and avoiding stains and weird blending along the seam.
Breakaway and Dissolvable support materials in your print job will print cleaner and faster.
Faster Printing
With increased printing speeds, upto 5x faster than other 3D printers, the MD-400D achieves ultra-high efficiency printing.
500mm/s Travel Speed
300mm/s Print Speed - Material Dependant
40mm³/s maximum material flow rate
Higher Temperature Materials
Extruders running at up to 350°C can process a wide range of materials from PLA to PP and PC.
They heat up fast! Getting to 200°C in about 40 seconds
Intelligent IDEX Calibration
Intelligent bed mapping on both extruders improves bottom layer surface finish and better bed adhesion, reducing warping and improving print success rates.
| Print Technology | Fused Deposition Modeling (FDM) |
| Print Volume | 400 * 400 * 400 mm |
| Copy Mode | 400(2*200)*400*400 mm |
| Mirror Mode | 320(2*160)*400*400 mm |
| Machine Dimensions | 690 * 790 * 910 mm |
| Extruder Quantity | Twin Independant |
| Nozzle Diameter | 0.4mm (0.6, 0.8, 1.0 mm optional) |
| Max Extruder Temperature | ≤350°C (Recommended temperature ≤320 ℃) |
| Platform Temperature | ≤110°C |
| Max Flow | 40mm³/s |
| Max Print Speed | 500mm/s (Recommend Printing Speed: 200-300mm/s ) |
| Display Screen | 7-inch HDMI touch screen |
| Slicing Software | MingDa OrcaSlicer, Prusa Slicer, etc |
| Connectivity | None, Ethernet, WiFi, Cloud Management |
| Camera | Yes, for Print Monitoring |
| Input Voltage | 100/240AC 50/60Hz |
| Rated Power | 800W |
| Firmware | Klipper |
| Filament Compatibility | Common filament: PLA, TPU, PETG
Engineering filament: PA-CF/GF, PET-CF/GF, HtPA-CF/GF, ABS-GF25, ABS-CF20, PA-GF25/CF25
Support filament: S-Mulit, S-HtPA, PVA, etc |
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
