Raise3D E3 - Precise, Reliable, Affordable

Choose the E3 to:
• Boost your production
• Experience reliable flexible filament printing
• Print end-use parts with excellent surface finish
• Print difficult materials at up to 200mm/s

Continuing the E2 Series' full features
• Dual Independant Extruders allows not only crisp dual extrusion prints, but the ability to produce two prints simultaneously
• Mirror Mode prints the master and inverse simultaneously
  
• Duplicate Mode prints two of the same models at once
• Single Extruder Prints: 330 x 240 x 240mm | Dual Extruder Prints: 295 x 240 x 240mm
  
• Auto Bed Mapping - While the bed is factory levelled, the bed mapping allows the machine to automatically adjust for an slight deviations of the bed
• Flex Bed Plate - The long-life magnets hold the bed in place while printing, but allow you to lift it out of the machine, and flex it to remove you prints. No grappling with spatulas and risking damage to the bed surface, or your hands
• On-board camera allows you to monitor prints from the ideaMaker software on your local network, or via RaiseCloud over the internet
• Power loss recovery and filament detection means that if either occurs during a print, it can be resumed after the problem is fixed without restarting the job
• Door open detection setting means you can have the machine go in to a cold pause whenever the door is opened
• Open filament - You can use Raise or OFP filaments using the presets within the software, or create your own profiles for other materials
• Full Metal Frame - provides a reliable motion system for smooth movement and precise positioning for higher quality printing
• HEPA + Carbon air filtration removes toxic particles released during the 3D printing process
• Touchscreen - Use the 7-inch touch screen to watch video guides. Efficiently monitoring the printing process and adjust main parameters on the fly