Prices + Stock updated 9 Mar @ 13:04
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 2kg Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to PLA and PET
Features
Specs
Support
Large 2kg spool - made especially for Bilby3D!
Printing complex designs may only be possible with temporary support structures. Dissolvable support material saves post-processing time, and allows supports to be removed from locations that may otherwise be difficult or impossible
Ultrafuse BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility increases with higher water temperatures.
It offers great compatibility to a variety of materials including: PLA, PLA PRO1, PET, some TPU, ABS Fusion+, PA and PAHT CF15.
IMPORTANT! Store this monofilament in a sealed bag, container or dry cabinet to prevent moisture uptake.
Next >
More Information
- Butenediol Vinyl Alcohol Co-polymer (BVOH) filament
- Colour: Natural Yellow
- Diameter: 1.75mm
- Weight: 2000g
Aprox. Spool Dimensions:
- 298mm diameter
- 100mm wide
- Hole Size: 52mm Diameter
Product Dimensions: 290 x 290 x 100mm
Next >
Recommended 3D-Print processing parameters
Nozzle Temperature: 190 – 210 °C
Build Chamber Temperature: not required
Bed temperature: 60 – 100 °C
Bed Material: Glass
Nozzle Diameter: = 0.4 mm
Print Speed: 30-60mm/s
Drying Recommendations:
Drying recommendations to ensure printability; 60 °C in a hot air dryer or vacuum oven for 4 to 16 hours
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
Material Safety Data Sheet
Technical Data Sheet
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 750g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility increases with water temperature. It offers great compatibility to a variety of materials.
Good adhesion to PLA and PET, can work with ABS and Nylon depending on your setup
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 350g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to PLA and PET, can work with ABS and Nylon depending on your setup
Buy Now
Raise3D Premium PVA PLUS Support Material - 1.75mm - Natural - 750g
Raise3D Premium PVA+ is a polyvinyl alcohol (PVA)-based cold water-soluble support filament for FFF 3D printing with dual extruders.
*Note- Not detectable In optical filament sensors as on Raise 3d Printers
Buy Now
3DXTech AquaTek X1 Support Material - 1.75mm - Natural - 500g
AquaTek™ X1 Universal Water Soluble Support Filament
AquaTek™ X1 is an all-new advanced universal water soluble support material formulated specifically for printing complex parts.
AquaTek™ X1 is readily water soluble in warm water with excellent adhesion to the broadest range of materials - including popular advanced composite materials CarbonX™ Carbon Fiber Nylon and AmideX™ Glass Fiber Nylon.
Buy Now
3DXTech Thermax High-Temp Support Material - 1.75mm - Natural- 500g
HTS high-temp break-away support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials. ThermaX™ HTS High-Temp Support can be used as a break-away support with:
- PEKK + PEEK
- Ultem PEI
- PPSU
- PSU
- PPS
Buy Now
Ecoworks Dissolving Support Cleaning Additive (24 Pack)
Faster effective support removal, for any water soluble filament
Buy Now
PolyMaker PolyDissolve S2, 1.75mm, 500g
PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
We recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
