Raise3D Industrial PPA GF is a glass fiber-reinforced composite filament material based
on PPA (polyphthalamide or high-performance / High-Temperature Nylon).
FeaturesSpecsSupport
Raise3D Industrial PPA GF is a glass fiber-reinforced composite filament material based
on PPA (polyphthalamide or high-performance/high-temperature Nylon). PPA can be
distinguished from aliphatic polyamides (e.g.PA6) by a higher melting point, glass
transition temperatures (Tg), lower moisture absorption, and greater dimensional stability.
The incorporation of short glass fibers further improves upon the properties of PPA
matrix, which makes PPA GF printed parts promising for end-use applications in the
automotive, aerospace, electrical and electronics (E&E) industries.
Also available in Orange, this filament is compatible with Raise3D Industrial PPA Support Filament.
See Technical Data Sheet (on Support Tab) for full info
Heat Deflection Temperature (°C)
- 101°C ISO75 1.8 MPa
- 147°C ISO75 0.45 MPa
Note:
Abrasion of the brass nozzle happens frequently when printing PPA GF. Using abrasion resistance nozzle,
such as hardened steel and above grade nozzles are highly recommended.
After the printing, it is recommended to anneal the model in the oven at 80-100°C for 8 hours and cool
the room temperature naturally.
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
CarbonX™ CF-HTN is an advanced semi-aromatic polyphthalamide (PPA) reinforced with high-modulus carbon fiber. This polymer is widely used for metal replacement applications that must resist high mechanical loads at elevated temperatures and aggressive chemical environments. HTN has traditionally been a go-to material for demanding applications in automotive, aerospace, oil & gas, electrical, electronics, and industrial markets.
Buy Now
Raise 3D Industrial PPA CF - 1.75mm - Black - 1kg Spool
Raise3D Industrial PPA CF is a carbon fiber-reinforced composite filament material based
on PPA (polyphthalamide or high-performance / high-temperature Nylon).
Raise3D Industrial PPA GF is a glass fiber-reinforced composite filament material based
on PPA (polyphthalamide or high-performance / High-Temperature Nylon).
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
