Raise3D Industrial PPA GF is a glass fiber-reinforced composite filament material based on PPA (polyphthalamide or high-performance/high-temperature Nylon). PPA can be distinguished from aliphatic polyamides (e.g.PA6) by a higher melting point, glass transition temperatures (Tg), lower moisture absorption, and greater dimensional stability. The incorporation of short glass fibers further improves upon the properties of PPA matrix, which makes PPA GF printed parts promising for end-use applications in the automotive, aerospace, electrical and electronics (E&E) industries.

Also available in Orange, this filament is compatible with Raise3D Industrial PPA Support Filament.

Next > More Information

See Technical Data Sheet (on Support Tab) for full info
Heat Deflection Temperature (°C)
- 101°C ISO75 1.8 MPa
- 147°C ISO75 0.45 MPa

Note:
Abrasion of the brass nozzle happens frequently when printing PPA GF. Using abrasion resistance nozzle, such as hardened steel and above grade nozzles are highly recommended.

After the printing, it is recommended to anneal the model in the oven at 80-100°C for 8 hours and cool the room temperature naturally.



Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet

Technical Data Sheet