Together with Polymakers Warp-Free™ and Fiber-Adhesion™ technology, PolyMide™? PA612-CF offers an optimal balance by combining the advantages of both PA6 and PA12 with optimized fiber reinforcement to deliver a high-performance filament with outstanding potential for industrial engineering, tooling, automotive, and end-use applications.

Tip - Although Nylon 612 is less sensitive to moisture, we highly recommend to use a wear resistant nozzle, to print with the PolyBox™ and to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.

Features

• Best of PA6 and PA12 - PolyMide™ PA612-CF is a copolymer combining PA6 and PA12 with 15% chopper carbon fiber to deliver high stiffness, tensile strength and heat resistance with lower moisture sensitivity. PolyMide™ PA612-CF offers the best middle ground between PA6 and PA12 and is a great-all-rounder for real-world applications that require the higher mechanical performance and affordability of short-chain nylon (PA6) with the reduced moisture sensitivity of long-chain nylon (PA12).
• Reduced Moisture Sensitivity - In most applications nylon parts absorb moisture from the air. The water molecule increases toughness and durability of the nylon while reducing strength and stiffness. PA6 is more susceptible to absorbing moisture than PA12 and as a result the mechanical properties of PA6 are effected in some application environments. PolyMide™ PA612-CF is less hygroscopic than PA6-CF making it an ideal and cost-effective alternative to PolyMide™ PA6-CF for parts which may be subject to high humidity.
• Excellent Heat Resistance - Featuring a high heat resistance after annealing[1], PolyMide™ PA612-CF offers excellent heat resistance for demanding applications where heat and stress are critical design factors.
• Outstanding Layer Adhesion - Most fiber reinforced materials show a decrease in z-axis layer adhesion when compared with their non-fiber reinforced Nylons, producing a part that is only stronger on the X-Y axis but detrimental to the Z axis. Polymakers Fiber Adhesion™ technology improves the layer adhesion of fiber reinforced materials, by optimizing the surface chemistry of the fibers to achieve better dispersion and bonding to the matrix. The implementation of this technology in PolyMide™ PA612-CF not only solves this problem but actually increases Z axis tensile strength creating more isotropic parts that are strong in every direction.
• Warp-Free™ - Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behaviour of Nylon, which enables the material to fully release the internal stress before solidification. The Warp-Free™ technology in PolyMide™ PA612-CF is designed to work best with minimal bed temperatures.
• Excellent Printability – Unlike many other brands of Nylon filament, PolyMide™ PA612-CF is extremely easy to work with, exhibiting excellent dimensional stability during printing. It is compatible with most filament-based 3D printers capable of reaching 260°C nozzle temperature and no heated bed or chamber is required!
• Uncompromised Quality - Polymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches.

[1] PolyMide™ PA612-CF displays the best mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization during the printing process, an additional step is required: Annealing. PolyMide™ PA612-CF can be annealed in the oven at 80°C for 6 hours right after the printing process.

Next >

Print Settings

• Nozzle Temperature: 260°C – 300°C *
• Printing Speed: 30-60mm/s
• Bed Temperature: 25°C – 50°C (Do NOT exceed 50 °C)
• Bed Surface: almost any surface with a thin coat of PVA glue
• Cooling Fan: OFF

Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different printers and nozzle diameters * We highly recommend to use a wear resistant nozzle

Notes

• Annealing: Post-printing; PolyMide™ PA612-CF parts can be annealed in an oven for 6 hours at 80°C to maximize mechanical performance and heat resistance.
• Drying Settings: 80°C for 12h
• Recommended Support Materials: PolySupport™ for PA12
• Technical Data Sheets: Contact us for TDS

The typical values presented in Polymakers data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.

Product Dimensions: 200 x 200 x 63mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product