Fiberon PolyMide™ PA612-CF is a carbon fiber reinforced nylon filament based on a copolymer of Nylon 6 and Nylon 12. Featuring 15% chopped carbon fibers by weight, this filament has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials.
PolyMide™ PA6-CF is a 20% carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
PolyMide™ PA6-GF is a 25% glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
PolyMide™ PA6-GF is a 25% glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Spectrum Nylon, PA6 Carbon Fibre, 1.75mm, 500g - UNTIL SOLD OUT
High temperature construction material
Nylon PA6 CF15 is a high-temperature, black, PA6-based construction material. Filling with 15% carbon fibres increases significantly the mechanical strength of the polyamide the material is based on. The filaments specific quality is the moisture absorption reduced by half and the water absorption time is four times lower than that of the pure PA6. Printing does not require a heated chamber and no deformation occurs. The material is compatible with the HIPS and BVOH support materials. In addition, Nylon PA6 CF15 features a very low linear shrinkage (up to 0.1%), a high deformation temperature (240°C), working temperature (180°C) and low thermal expansion coefficient (0.4 10-5/K).
Nylon PA6 CF15 is a high-temperature, black, PA6-based construction material. Filling with 15% carbon fibres increases significantly the mechanical strength of the polyamide the material is based on. The filaments specific quality is the moisture absorption reduced by half and the water absorption time is four times lower than that of the pure PA6. Printing does not require a heated chamber and no deformation occurs. The material is compatible with the HIPS and BVOH support materials. In addition, Nylon PA6 CF15 features a very low linear shrinkage (up to 0.1%), a high deformation temperature (240°C), working temperature (180°C) and low thermal expansion coefficient (0.4 10-5/K).
Spectrum Nylon, PA6 Carbon Fibre, Black, 1.75mm, 1kg Spool - UNTIL SOLD OUT
High temperature construction material
Nylon PA6 CF15 is a high-temperature, black, PA6-based construction material. Filling with 15% carbon fibres increases significantly the mechanical strength of the polyamide the material is based on.
3DXtech Obsidian PA6+CF Black (Onyx Alternative), 1.75mm, 1kg spool
Equivalent to 800cm³, 1kg Obsidian™ PA6+CF is an excellent drop-in replacement for Markforged Onyx™ and is compatible for use in all Markforged and Raise3D printers with toughed nozzles. Obsidian™ delivers excellent performance, appearance, and a significant cost savings.
3DXtech Obsidian PA6+CF Black (Onyx Alternative), 1.75mm, 2kg spool
equivalent to 1600cm³, 2kg Obsidian™ PA6+CF is an excellent drop-in replacement for Markforged Onyx™ and is compatible for use in all Markforged and Raise3D printers with toughed nozzles. Obsidian™ delivers excellent performance, appearance, and a significant cost savings.
3DXtech Obsidian PA6+GF Blue (Onyx Alternative), 1.75mm, 1kg spool
Equivalent to 800cm³, 1kg Obsidian™-GF is a Glass Fiber reinforced PA6 that was formulated to print using stock Onyx™ settings. This is an excellent drop-in replacement for Markforged Onyx™ that offers many much-awaited colors in an engineering-grade material.
Equivalent to 800cm³, 1kg Obsidian™-GF is a Glass Fiber reinforced PA6 that was formulated to print using stock Onyx™ settings. This is an excellent drop-in replacement for Markforged Onyx™ that offers many much-awaited colors in an engineering-grade material.
3DXtech Obsidian PA6+GF Green (Onyx Alternative), 1.75mm, 1kg spool
Equivalent to 800cm³, 1kg Obsidian™-GF is a Glass Fiber reinforced PA6 that was formulated to print using stock Onyx™ settings. This is an excellent drop-in replacement for Markforged Onyx™ that offers many much-awaited colors in an engineering-grade material.
Equivalent to 800cm³, 1kg Obsidian™-GF is a Glass Fiber reinforced PA6 that was formulated to print using stock Onyx™ settings. This is an excellent drop-in replacement for Markforged Onyx™ that offers many much-awaited colors in an engineering-grade material.
3DXtech Obsidian PA6+GF Red (Onyx Alternative), 1.75mm, 1kg spool
Equivalent to 800cm³, 1kg Obsidian™-GF is a Glass Fiber reinforced PA6 that was formulated to print using stock Onyx™ settings. This is an excellent drop-in replacement for Markforged Onyx™ that offers many much-awaited colors in an engineering-grade material.
Equivalent to 800cm³, 1kg Obsidian™-GF is a Glass Fiber reinforced PA6 that was formulated to print using stock Onyx™ settings. This is an excellent drop-in replacement for Markforged Onyx™ that offers many much-awaited colors in an engineering-grade material.
3DXtech Obsidian PA6+GF White (Onyx Alternative), 1.75mm, 1kg spool
Equivalent to 800cm³, 1kg Obsidian™-GF is a Glass Fiber reinforced PA6 that was formulated to print using stock Onyx™ settings. This is an excellent drop-in replacement for Markforged Onyx™ that offers many much-awaited colors in an engineering-grade material.
Equivalent to 800cm³, 1kg Obsidian™-GF is a Glass Fiber reinforced PA6 that was formulated to print using stock Onyx™ settings. This is an excellent drop-in replacement for Markforged Onyx™ that offers many much-awaited colors in an engineering-grade material.
Fiberon™ is polymakers family of fiber-reinforced composite filaments developed to provide outstanding mechanical performance for a range of engineering applications.
Fiberon™ is polymakers family of fiber-reinforced composite filaments developed to provide outstanding mechanical performance for a range of engineering applications.
Spectrum Nylon, PA6 + Glass Beads, 1.75mm, 1kg Spool - UNTIL SOLD OUT
Poliamide filled with glass micro-spheres
Nylon PA6 GK10 is a new, high-temperature PA6-based construction material in the natural colour. Perfect for 3D printing. Filled with glass beads, it is more flexible than the polyamide the material is based on. Its specific quality is a low impact of moisture and temperature on the measurements or electrical properties as compared to PA66. In addition, Nylon PA6 GK10 features a low linear shrinkage (up to 0.3-0.5%) and a relatively high working temperature (160oC).
Spectrum Nylon, PA6 + Glass Beads, 1.75mm, 500g Spool - UNTIL SOLD OUT
Poliamide filled with glass micro-spheres
Nylon PA6 GK10 is a new, high-temperature PA6-based construction material in the natural colour. Perfect for 3D printing. Filled with glass beads, it is more flexible than the polyamide the material is based on. Its specific quality is a low impact of moisture and temperature on the measurements or electrical properties as compared to PA66. In addition, Nylon PA6 GK10 features a low linear shrinkage (up to 0.3-0.5%) and a relatively high working temperature (160oC).
Nylon PA6 GK10 is a new, high-temperature PA6-based construction material in the natural colour. Perfect for 3D printing. Filled with glass beads, it is more flexible than the polyamide the material is based on. Its specific quality is a low impact of moisture and temperature on the measurements or electrical properties as compared to PA66. In addition, Nylon PA6 GK10 features a low linear shrinkage (up to 0.3-0.5%) and a relatively high working temperature (160oC).
Polyamide PA6 (Nylon) is an extremely durable, technical material. Parts printed from Nylon have not only a high resistance to abrasion, but also a high temperature resistance. In addition, polyamide PA6 is characterized by good insulating properties, chemical resistance to greases, oils and high mechanical strength. The above features make it applicable to print functional parts, including slide bearings, gearwheels or guideways. Nylon PA6 filament is very sensitive to moisture. In order to obtain the best performance of the printed object, it is recommended to dry the material carefully before printing. Spectrum Filaments PA6 as one of the few is also characterized by very low shrinkage of approx. 0.3%.
Polyamide PA6 (Nylon) is an extremely durable, technical material. Parts printed from Nylon have not only a high resistance to abrasion, but also a high temperature resistance. In addition, polyamide PA6 is characterized by good insulating properties, chemical resistance to greases, oils and high mechanical strength. The above features make it applicable to print functional parts, including slide bearings, gearwheels or guideways. Nylon PA6 filament is very sensitive to moisture. In order to obtain the best performance of the printed object, it is recommended to dry the material carefully before printing. Spectrum Filaments PA6 as one of the few is also characterized by very low shrinkage of approx. 0.3%.
Polyamide PA6 (Nylon) is an extremely durable, technical material. Parts printed from Nylon have not only a high resistance to abrasion, but also a high temperature resistance. In addition, polyamide PA6 is characterized by good insulating properties, chemical resistance to greases, oils and high mechanical strength. The above features make it applicable to print functional parts, including slide bearings, gearwheels or guideways. Nylon PA6 filament is very sensitive to moisture. In order to obtain the best performance of the printed object, it is recommended to dry the material carefully before printing. Spectrum Filaments PA6 as one of the few is also characterized by very low shrinkage of approx. 0.3%.
CarbonX ABS+CF is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing
CarbonX ABS+CF is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing
CarbonX™ ASA+CF is made using our popular ASA compounded with high-modulus carbon fiber. This material offers excellent UV-stability, matte surface finish, ease of printing, strength & stiffness, coupled with superior dimensional stability. We found our new favorite material to print structural parts!
CarbonX™ ASA+CF is made using our popular ASA compounded with high-modulus carbon fiber. This material offers excellent UV-stability, matte surface finish, ease of printing, strength & stiffness, coupled with superior dimensional stability. We found our new favorite material to print structural parts!
CarbonX™ ezPC+CF is made using our easy to print ezPC Polycarbonate and reinforced with premium high-modulus carbon fiber. This material offers excellent printability, high thermal properties, strength & stiffness, superior dimensional stability, and an amazing surface finish. This will become your new go-to for engineering-grade parts.
CarbonX™ Carbon Fiber PA12 is made using high-modulus carbon fiber and a specialty Nylon 12 (PA12) that we chose for its printability, thermal properties, and chemical resistance. PA12 is widely used in a variety of industries due to its excellent chemical resistance, low moisture absorption, and wide processing window. This formulation ensures very low shrinkage in the printed part resulting in excellent dimensional stability. This makes CF-PA12 an excellent choice for tools, fixtures, and jigs.
CarbonX™ PP+CF is made using a specialty formulated PP copolymer and reinforced with 15% premium high-modulus carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
CarbonX™ PP+CF is made using a specialty formulated PP copolymer and reinforced with 15% premium high-modulus carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
CarbonX™ CF-HTN is an advanced semi-aromatic polyphthalamide (PPA) reinforced with high-modulus carbon fiber. This polymer is widely used for metal replacement applications that must resist high mechanical loads at elevated temperatures and aggressive chemical environments. HTN has traditionally been a go-to material for demanding applications in automotive, aerospace, oil & gas, electrical, electronics, and industrial markets.
PolyMaker Fiberon PPS + 10% Carbon Fibre filament, 1.75mm diameter.
Fiberon™ PPS-CF10 is a carbon fiber reinforced PPS (Polyphenylene sulfide) filament, with minimal warping during printing and no need for a heated chamber. With exceptional mechanical strength, high heat resistance, chemical resistance, V0 flame retardancy, and moisture insensitivity, its specifically designed for professionals operating in extreme conditions.
Makerbot Nylon (PA 6/66) Carbon Fibre has the highest peak performance in all categories, it is significantly affected by moisture which will reduce both strength and modulus.
The updated Raise3D E2CF has redesigned extruders and sealed filament boxes specially for the latest Carbon Fibre reinforced materials.
It provides the stability and repeatability of the E2 model, with IDEX - Independant Twin Extruders, and adds the durability of Silicon Carbide nozzles for the most abrasive materials
5% Bulk Discount available - Order 5 or more machines at once - Conditions apply
Get a range of Spectrum Carbon Fibre Reinforced filament with this Mix pack of 5 mini spools.
The included filament are: PLA Carbon, PETG Carbo, ASA-X CF10, PA6 Low Warp CF15
The first of the PCTG-based composites we developed was a carbon fibre version - PCTG CF10. The carbon fibres used give the filament an extremely high stiffness, while reducing the brittle fracture typical for other PETG-based carbon composites. PCTG CF10 filament allows the printing of parts with increased hardness and tensile strength compared to classic PCTG. The use of carbon fibres increases the thermal resistance of the filament, further reduces shrinkage and gives the characteristic carbon matt appearance to the printed models.
Spectrum Carbon PLA is a modified, PLA-based filament blended with carbon fibers which contributes to a considerably higher rigidity, hardness, and tensile resistance while retaining low shrinkage and very good adhesion to build platforms typical for the pure PLA. The 10% addition of carbon fibre enables you to obtain matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.
S-Flex Carbon is an innovative 3D printing material that seamlessly combines the flexibility of traditional flex filament with the added strength and durability provided by a 20% carbon fiber reinforcement. This hybrid material offers a wide range of applications thanks to its unique combination of properties.
High Temp Resistant PLA + Black Carbon Fibre - 1.75mm - 500g - UNTIL SOLD OUT
Protopasta Carbon Fiber Composite HTPLA is a combination of milled carbon fibers and high-performance PLA. Resulting 3D prints made with our Carbon Fiber HTPLA are demonstrably more rigid, providing excellent structural strength and layer adhesion with very low warpage. The embedded carbon provides a beautiful matte black finish with a slight sheen, resulting in 3D prints with exceptional accuracy, finish, and performance!
PLA + Carbon Fiber - 2.85mm - 125g Coil - UNTIL SOLD OUT
This amazing filament is a blend of PLA and carbon Fiber by ProtoPasta in the USA. It prints easily at 230-245 degrees on a cold bed. We used glue on a glass bed for our test.
PLA Blend Filament - Carbon Fiber - 1.75mm - 500g - UNTIL SOLD OUT
This amazing filament is a blend of PLA and carbon Fiber by ProtoPasta in the USA. Will wear nozzle so we advise using a wear resistant nozzle (sold seperately). Produces impressively strong models with minimum fuss and difficulty.
PLA Blend Filament - Carbon Fiber - 1.75mm - 50g Sample Coil - UNTIL SOLD OUT
This amazing filament is a blend of PLA and carbon Fiber by ProtoPasta in the USA. It prints easily at 230-245 degrees on a cold bed. We used glue on a glass bed for our test. Tendancy to leave small balls/pimples on surface which easily clean up. Will wear nozzle so we advise using a wear resistant nozzle (sold seperately). Produces impressively strong models with minimum fuss and difficulty.
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
