Prices + Stock updated 9 Mar @ 13:04
PolyMaker PolyDissolve S1, 1.75mm, 750g
PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
Features
Specs
Support
Complex Geometry - PolyDissolve™ S1 is a preferable solution when printing complex geometries, overhangs, internal cavities and complicated structures. It liberates you from support removal problems, and enables greater design freedom.
Wide Material Support - PolyDissolve™ S1 is engineered to have a good adhesion and perfect interface with a variety of supported materials from Polymaker including Nylon, PLA, TPU and PVB.
Water Soluble - Optimized to dissolve in water, supports printed in PolyDissolve™ S1 will dissolve in tap water. Safe and easily accessible!
Improved Surface Quality - Greatly improve the surface quality where supports interface with your prints when using PolyDissolve™ S1.
Quality Control - Polymakers leading quality control process and rigorous in-house testing, ensure reliable printing and consistency across spools and batches.
Next >
Print Settings
Nozzle Temperature: 215°C – 225°C
Printing Speed: 20mm/s – 40mm/s
Bed Temperature: 25°C – 60°C
Bed Surface: Glass with glue, blue tape
Cooling Fan: ON
Material Compatibility
PLA based material from Polymaker’s portfolio + +
PETG based material from Polymaker’s portfolio +
ABS based material from Polymaker’s portfolio – –
PC based material from Polymaker’s portfolio – –
PVB based material from Polymaker’s portfolio + +
TPU based material from Polymaker’s portfolio + +
Nylon based material from Polymaker’s portfolio + +
__________________________________
+ + support the model very well
+ generally support the model depending on its geometry
– generally doesn’t support the model depending on its geometry
– – do not support the model
Notes
Drying Settings: 80°C for 12h
Other: It is highly recommended to use the PolyBox™ when printing with PolyDissolve™ S1 and to store it in the resealable bag.
Product Dimensions: 200Ø x 50mm
Next >
We have extensive tested this product on the Raise Pro 2 printers with PLA and PA6-carbon fibre, with perfect and repeated success. We extruded at 220deg C, using a heat bed btw 30-60, and always with the dis-
solvable as the raft.
You will need to change some settings at slicing.
- You need a ZERO Raft to model gap
- Print Speed must be less than 40mm/sec, we found 20mm was best
- You MUST make sure the raft prints no faster than 20mm/sec
All of these are easily adjusted in Raise 3D slicer IDEAMAKER under the advanced tab.
IMPORTANT : we have had no success with TPU. In worldwide discussions it seems we are not alone and are looking at alternative dissolvables for TPU
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Material Safety Data Sheet
Technical Data Sheet
Buy Now
PolyMaker Polybox v2 - LAST ONE
Keep you filament away from dust and moisture with the PolyBox filament storage box - with inbuilt temperature and humidity gauge
Buy Now
PolyMaker PolySupport Material, 1.75mm, 750g
PolySupport™ works just like your regular 3D printing filaments. Easy to print and store. No sensitivity to normal moisture or heat and no need to work with dangerous organic solvents.
Buy Now
Raise3D Premium PVA PLUS Support Material - 1.75mm - Natural - 750g
Raise3D Premium PVA+ is a polyvinyl alcohol (PVA)-based cold water-soluble support filament for FFF 3D printing with dual extruders.
*Note- Not detectable In optical filament sensors as on Raise 3d Printers
Buy Now
3DXTech Thermax High-Temp Support Material - 1.75mm - Natural- 500g
HTS high-temp break-away support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials. ThermaX™ HTS High-Temp Support can be used as a break-away support with:
- PEKK + PEEK
- Ultem PEI
- PPSU
- PSU
- PPS
Buy Now
3DXTech AquaTek X1 Support Material - 1.75mm - Natural - 500g
AquaTek™ X1 Universal Water Soluble Support Filament
AquaTek™ X1 is an all-new advanced universal water soluble support material formulated specifically for printing complex parts.
AquaTek™ X1 is readily water soluble in warm water with excellent adhesion to the broadest range of materials - including popular advanced composite materials CarbonX™ Carbon Fiber Nylon and AmideX™ Glass Fiber Nylon.
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 350g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to PLA and PET, can work with ABS and Nylon depending on your setup
Buy Now
PolyMaker Fiberon Glass Fibre reinforced PA6 Nylon, Grey, 1.75mm, 2kg
PolyMide™ PA6-GF is a 25% glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Buy Now
PolyMaker PolyDissolve S2, 1.75mm, 500g
PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
We recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.
Buy Now
PolyMaker Fiberon Glass Fibre PA6 Nylon, Grey, 1.75mm, 500g
PolyMide™ PA6-GF is a 25% glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Buy Now
PolyMaker Fiberon PA6 Nylon + Carbon Fibre, Black, 1.75mm, 2kg
PolyMide™ PA6-CF is a 20% carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
Buy Now
Raise3D Premium ASA Filament - 1.75mm - Black - 1kg
Raise3D brings you a filament with superior UV and weather resistant properties compared to standard ABS
Buy Now
PolyMaker Fiberon PA6 Nylon + Carbon Fibre, Black, 1.75mm, 500g
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
